Always the Best Service in the Northwest Location!

Gutter Guards That Beat Northwest Debris—Installed by Blue Moon

Stop climbing ladders. Keep fir needles, maple helicopters, and moss out for good with our micro‑mesh leaf‑protection systems.

Why Add Gutter Guards?

A properly installed roof does more than keep water out. It:

End Seasonal Clogs

Micro‑mesh blocks debris down to pine needles, so water keeps flowing all year.

Protect Fascia & Foundation

No overflow means dry trim, siding, and basements—even in Portland’s heaviest downpours.

Slash Maintenance Costs

Guards cut cleanings from twice a year to once every few years—saving money and hassle.

Extend Gutter Life

Clean, lightweight gutters avoid sagging and corrosion.

Performance Facts

  • 200″/hr Flow Rate – Micro‑mesh passes ASTM D‑7032 lab tests—far beyond Portland’s record rainfall.
  • No Roof Penetrations – Clamp‑on or fascia‑screw mounts keep shingle warranties intact.
  • Snow & Ice Ready – Low‑profile design won’t snag ice chunks; optional heat‑trace cable keeps eaves clear.

Cost & Financing

Installed pricing averages $9–$14 per linear foot for stainless mesh, $6–$8/ft for louvered aluminum. Zero‑interest for six months on projects over $1,000 (OAC).

Guard Systems We Install

Guard Type

Debris Protection

Material

Warranty

Best Fit

Stainless Micro‑Mesh

≤ 50 microns (pine needles, shingle grit)

316L stainless + aluminum frame

40 yrs

Heavily treed lots

Aluminum Louvered Cover

Leaves & larger needles

.019 ga aluminum

25 yrs

Moderate foliage, budget friendly

Reverse Curve Solid Cap

Leaves, twigs; sheds water via slit

Powder‑coated aluminum

Lifetime

Roofs with heavy leaf drop, minimal needles

Copper Micro‑Mesh

Same as stainless; patinas naturally

Copper mesh + frame

50 yrs

Premium homes / coastal areas

All guard installs include full gutter tune‑up: reseal corners, adjust pitch, and tighten hangers.

Our Four‑Step Guard Installation

Free Roof & Gutter Assessment

We inspect debris type, roof pitch, and existing gutter health to recommend the best guard.

Deep Clean & Tune‑Up

Hand‑scoop debris, flush downspouts, reseal and re‑hang as needed—guards only go on clean, perfect gutters.

Precision Guard Install

Panels cut to length on site, screws set through frame into gutter lip and fascia—not the roof deck.

Water Test & Warranty Registration

Hose test confirms flow; we log your install for warranty service.

Most homes: 2–4 hours start to finish.

Why Choose Blue Moon for Guards

Leaf & Needle Expertise

We match guard aperture to your specific trees—fir, cedar, big‑leaf maple, or alder.

Roof‑Smart Installers

GAF & CertainTeed certified crews avoid shingle lift and maintain roof warranties.

Transparent Quotes

Per‑foot pricing, no hard‑sell packages.

4.9‑Star Google Rating

300 + homeowners trust our honest advice.

Warranty Coverage

25‑ to 50‑Year Material Warranties depending on guard line.

5‑Year Blue Moon Workmanship Guarantee—free adjustments if debris gets through.

FAQ

Do guards eliminate all cleanings?

They cut cleanings dramatically, but an inspection every couple of years ensures fine grit hasn’t built up.

Will guards cause ice dams?

No. Proper attic ventilation and guard design prevent ice formation. We also offer heat‑trace cable for north‑facing eaves.

Can guards fit my existing gutters?

Yes—most profiles attach to 5″ or 6″ K‑Style and even half‑round. We tune gutters first to guarantee fit.

Do guards void gutter warranties?

No. Installation methods meet gutter manufacturer specs, so material coverage stays intact.

Are cheaper foam or brush inserts worth it?

Inserts clog quickly and trap moisture against the trough, accelerating corrosion. We recommend only tested, warrantied metal systems.

Service Area

Leaf‑protection installs for

and surrounding communities.

Ready for gutters that never leak or sag?